Backlight/Flashlight Function; Energy-Saving Mode - Little Journey DSO 364 Manual Del Usuario

Backlight/flashlight function

Backlight: Every time the SET button
9
button is pushed, the backlight
display turns on for approx. 10 seconds.
Flashlight: Pushing the button
2 seconds in standby mode, the flashlight
the thermometer (1 LED next to the probe tip) will
illuminate for approx. 10 seconds. At the same time,
the blue backlight of the buttons ( ) forehead
measurement
illuminate for approx. 15 seconds.
If you briefly push the button ( ) in standy mode,
the key lighting of the buttons ( ) ear measurement
and ( ) forehead measurement illuminate for ap-
prox. 15 seconds.
If the thermometer is switched off and
you push the button ( ), the backlight
of the LCD display will illuminate for ap-
prox. 10 second and the backlights of the
buttons ( ) forehead measurement and
( ) ear measurement will illuminate for
approx. 15 seconds.

Energy-saving mode

By default, the thermometer is configured to switch
to standby mode approx. 30 – 60 seconds after the
last button activity depending on the respective
mode (time, date and room temperature are shown
in alternation). If you would like the thermometer
to turn off completely after approx. 1 minute, follow
the steps below:
6
and ( ) ear measurement
Basic functions
3
or the MEM
2
of the LCD
8
( ) for approx.
12
of
7
21