Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
•
Check that the electricity supply has not been shut off.
•
If you are unable to turn the hob off after using it, disconnect it from the
power supply.
•
If alphanumeric codes appear on the display when the hob is switched on,
consult the following table for instructions.
DISPLAY CODE
Cookware is detected, but it is not
compatible with the requested
F0E1
operation.
Wrong power cord connection.
F0E7
The control panel switches off because
F0EA
of excessively high temperatures.
F0E2, F0E4, F0E6,
Disconnect the hob from the power supply.
F0E8, F0EC, F1E1,
Wait a few seconds, then reconnect the hob to the power supply.
F6E1, F7E5, F7E6
If the problem persists, call the service centre and specify the error code that appears on the display.
d E
The hob does not switch heat up.
The functions do not come on.
[when the hob is off]
The hob does not allow a special
function to be activated.
e.g.
:
The hob automatically sets a minimum
e.g.
power level to ensure that the cooking
[Power level lower than
zone can be used.
level requested]
SOUNDS PRODUCED DURING OPERATION
Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked to the pan
bottoms' characteristics (for example, when the bottoms are made from
different layers of material or are irregular).
SUPPORT
In the event of any operation problems, contact a Franke Technical Service
Centre.
Never use the services of unauthorised technicians.
When contacting the customer service, please provide the following
information:
– type of fault
– appliance model (Art.)
– serial number (S.N.)
This information is given on the data plate. The data plate is attached on
the bottom side.
You must also have proof of purchase if you're still within the warranty
period.
DESCRIPTION
The cookware is not well positioned on
the cooking zone or is not compatible
with one or more cooking zones.
The power supply connection is not
exactly as indicated in the "ELECTRICAL
CONNECTION" paragraph.
The internal temperature of the
electronic parts is too high.
DEMO MODE on.
The power regulator limits the power
levels in accordance with the maximum
value set for the hob.
The power regulator limits the power
levels in accordance with the maximum
value set for the hob.
Please note: The presence of water, liquid spilled from pots or any objects
resting on any of the hob buttons can accidentally activate or deactivate
the control panel lock function.
POSSIBLE CAUSES
These noises may vary according to the type of cookware used, and to the
amount of food, it contains and are not the symptom of something wrong.
– 12 –
SOLUTION
Press the On/Off button twice to remove
the F0E1 code and restore the cooking
zone's functionality. Then, try to use the
cookware with a different cooking zone or
use different cookware.
Adjust the power supply connection
according
to
the
CONNECTION" paragraph.
Wait for the hob to cool down before using
it again.
Follow the instructions in the "DEMO
MODE" paragraph.
See paragraph "Power management".
See paragraph "Power management".
Mod.
XXX XXX
Ind.C. XXXX XXXX XXXX
Prod.N. 86999XXXXXXX S.N. XXXX XXXX XXXX
WWW.FRANKE.COM
© Franke Technology and Trademark Ltd., Switzerland
"ELECTRICAL
Publicidad
