4.4. DOOR SPACE REQUIREMENTS
EN
The unit's door must be able to open fully as shown.
(W × D ≥ 902 × 1052 mm)
4.5. LEVELLING THE UNIT
To level the appliance, adjust the two levelling feet at
the front of the unit. If the unit is not level, the door and
magnetic seal alignments will not be covered properly.
Make sure that the foot touches the ground before use.
Look down from the top, adjust the levelling foot
clockwise or counter-clockwise to tighten or loosen it.
4.6. CLEANING BEFORE USE
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with
warm water using a wrung-out sponge or cloth. Wash the shelves and salad bin in
warm soapy water and dry completely before replacing in the unit. Clean the exterior of
the unit with a damp cloth.
If you need more information, refer to the "MAINTENANCE AND CLEANING" section.
4.7. BEFORE USING YOUR UNIT
■
Do not damage the power cord under any condition so as to ensure safety use, do
not use when the power cord is damaged or the plug is worn.
■
Do not put flammable, explosive, volatile and highly corrosive items in the
refrigerator to prevent damages to the product or fire accidents.
■
Do not place flammable items near the refrigerator to avoid fires.
■
This product is household refrigerators and shall be only suitable for the storage of
foods. According to national standards, household refrigerators shall not be used
for other purposes, such as storage of blood, drugs or biological products.
■
Do not place items such as bottled or sealed container of fluid such as bottled
beers and beverages in the freezer to prevent bursts and other losses.
■
Before placing any food in your unit, turn it on and wait for 24 hours, to make
sure it is working properly and to allow it time to fall to the correct temperature.
Your unit should not be overfilled.
•
You must check that you have a wall socket which is compatible with the plug
supplied with the unit.
•
Do not turn on until two hours after moving the unit.
Before plugging in
Before turning on
12
W