Front Runner FADR001 Manual De Instrucciones página 4

2
FIT AND SECURE
2.4
2.5
2.6
FADR001_REV_A00
Top Edge of Windscreen
Mark the middle of the ditch by measuring
390mm from the top edge of the windscreen.
Place the Foot Rail (Item 1) inside the ditch.
Centralize the first slot of the Foot rail
mounting foot with the mark.
Mark the remaining slot centres and remove
the Foot Rail.
Verify that the markings line up with the
slots in the Spacers (Item 8) before drilling
the mounting holes.
Remove the Spacers from the vehicle. Drill
a 6.5mm pilot hole in the center of the mark-
ings. Open the holes using a 12mm Drill.
4 © 2020 FRONT RUNNER VEHICLE OUTFITTERS