Publicidad
Idiomas disponibles
Idiomas disponibles
3
FIT AND SECURE
3.1
3.2
2.2
3.3
Center the rack and tighten fully. Finish off by fitting the M8 Nut Caps (Item 9) on the M8 Nyloc Nuts.
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
FRONT RUNNER RACK KITS OFTEN HAVE A HIGHER LOAD RATING THAN THE VEHICLES THEY ARE MOUNTED TO. PLEASE REFER TO YOUR SPECIFIC VEHICLE MANUFACTURER
FOR A RECOMMENDED ROOF RATING. FRONT RUNNER CANNOT BE RESPONSIBLE FOR IMPROPER LOADING BEYOND THE VEHICLE MANUFACTURER'S STATED LOAD CAPACITY.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
FADR001_REV_A00
4
11
10
9
Share your adventures on:
4MM
13mm
IMPORTANT!
6
Make sure that the wind deflector is
installed before you proceed to the next
step.
Fit your Roof Rack to the Foot Rails using
M8x20 Hex Bolts, M8x16x1.6SS Flat Washers
and M8 Nyloc Nuts (Items 6, 11 & 10) as
shown.
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
Publicidad
