UFESA AA5905 Instrucciones De Uso página 60

Instructions for Use
10 sec/
Programming the timer
The appliance needs to be turned on with
the clock set in order to programme the
start / stop times.
Press the "Timer" key
through the timer menu. Press the "+" key
to programme the different functions
available on your appliance. These are:
• "Off" : appliance not programmed.
• "Start" : programming the appliance
start time.
• "Start/ Stop"
appliance start and stop time.
• "Stop" : programming the appliance
stop time.
Programming the appliance start time
• Press the "Timer" key
cursor on the timer menu. The last
function programmed appears by default.
• Use the "+" and "–" keys to select the
"Start" function , (see "+" and "–" keys).
, to navigate
: programming the
, to position the
61
• Use the "down" key (see "up" and
"down" keys) to lower the cursor to the
start time menu. Then use the "+" / "–"
keys to modify the programmed time
until the desired time is reached.
• The time changes 15 minutes at a time.
• Press the "Timer" key
seconds without touching any keys to
memorise the set start time.
• The set time is displayed on the screen
together with the relevant symbol (the
"Start" symbol ) and the set
functions.
10 sec/
Programming the appliance start / stop
time
• Press the "Timer" key
cursor on the timer menu. The last
function programmed appears by default.
, or wait for 10
, to position the