English
Fig. B
9
•
Figure D - Hang the vac on the wall by placing the
opening on the base of the vac over the hooks in the
wall mount bracket as shown in Figure D.
Fig. D
Figure E - Insert the jack plug
•
charging socket.
Fig. E
Charging the Battery
WARNING:
supplied charger.
From new, the rechargeable cells of the product need a
minimum charge time of 16 hours to ensure full power.
•
The switch must be in the off ("O") position, the product
will not charge if it is in any other position.
Figure A, F - Plug the jack plug
•
into the charging socket
into any standard 120 Volt 60 Hz electrical outlet.
4
Fig. C
9
11
into the
11
For use only with the
11
of the charger
3
of the tool. Plug the charger
•
While charging, the charger may get warm; this
is perfectly normal and safe. It is safe to leave the
appliance connected to the charger indefinitely. The
charger automatically reduces power consumption
when charging is complete.
WARNING:
at ambient temperatures below 39° F (4° C) or above
104° F (40° C).
USE
Switching On and Off (Fig. G)
•
Figure g - To start, slide the On/Off switch
(i.e. "O"= Off, "I" = On).
•
To stop, slide the switch back.
•
Return the product to the charger immediately after use
so that it will be ready and fully charged for the next
use. Ensure that the product is fully engaged with the
charger plug.
Fig. G
Cleaning and Emptying the Product
WARNING:
Never use the vac without its filter.
nOTE: The filter is re-usable; do not confuse it with a
disposable dust bag, and do not throw it away when the
10
product is emptied. We recommend that you replace the
filter every 6–9 months depending on frequency of use.
There are two methods of cleaning the bowl, a quick empty
method and a thorough clean method.
For a Quick Empty (Fig. H, I)
Figure h - Press the dust bowl release button
•
handle and remove the dust bowl.
Fig. F
10
11
3
Do not charge the battery
Projectile/Respiratory Hazard:
1
forward
1
2
on the