Publicidad
Idiomas disponibles
Idiomas disponibles
Num
Object
1
Detachable handpiece/
2S
caler tips
3P
ower supllyS
4F
2 food switchS
5E
ndochuck/
6T
orque wrench/
7E
ndo wrench
2. Installation and adjustment
2.1 Operation
2.1.1 Open the packing box, make sure that all the parts and accessories are complete according to the packing list,
take the main unit out of the box, and put it on the the stable plane facing to the operator.In addtion,install the device
to an operator-friendly position.
2.1.2 Turn the water control knob to the max according to the picture 1 direction, Do not screw it over tight in case of
damage. [ note 1]
2.1.3 Insert the plug of the foot switch to its socket. (see picture 2)
2.1.4 Connect one end of the water pipe to the water entrance, and the other end to the clean water sourse. (see
picture 2)
2.1.5 Before treatment, make sure scaling tip, wrench and handpiece have been sterilized. Choose the scaling tip
according to the requirement, and fix the scaling tip with the wrench. ( see picture 4)
2.1.6 Turn on the power switch, the power indicator lighted and the machine is ready for work. Touch panel is applied
to this machine, power can be adjusted by directly touching the power indicator on the touch panel.
2.1.7 Under normal working condition, the frequency of the tips is very high, light touch and a certain to-and-fro motion
will eliminate the tartar without obvious heating, overexetion and overatay are forbidden.
RemarkT
ype No./model No./ Manufacturer/Trademark
HW-8L
//
ee picture 5
ZMN-03
ee picture 6
F2
TD-E1
TD-1L
//
DTE
DTE
Guilin Woodpecker
Woodpecker
DTE
DTE
DTE
7
Publicidad
