Publicidad
Idiomas disponibles
Idiomas disponibles
2.3.3 Powering On
Caution!
Before connecting the FWA-ASM2012 to the power outlet, please make sure that the power rating
of the outlet and the FWA-ASM2012 PSU match. Please also make sure that the primary circuit and
all power distribution is not overloaded. Inrush current and steady-state power specifications for the
FWA-ASM2012 can be found on the regulatory label on the top of the unit.
Connect the power cords to the PSU modules first and then to the power outlets.
The unit will automatically power on after power is supplied. The green LED on the front panel should
be lit as the unit is powered on.
Please refer to Section 1.4 for the location of front and rear panel elements.
2.3.4 Connecting to the Serial Console
The FWA-ASM2012 supports the operation via a serial terminal connection by default for scenarios
where a directly attached monitor, keyboard, and mouse are not available or not desirable. In this
configuration, BIOS output, as well as OS output, are provided via a serial terminal connection, such
as the RJ-45 Console port.
The remainder of this section describes how to configure PuTTY on a Windows platform for
connection with the FWA-ASM2012 serial console as a reference. Other terminal programs may be
used in a similar way as well.
Open up PuTTY and begin the configuration as shown below. Please use the actual COM port's
number on the client machine instead of "COM1".
1.
Specify "COM1" under the serial line and "9600" for speed, no parity, no flow control.
2.
Check Serial for connection type.
3.
Check "VT100+" for the keypad in the keyboard submenu.
4.
Check "Color" or "Both" for "Indicate the bold text" in the Colors submenu.
5.
Click the "Open" button and a PuTTY terminal screen will appear.
Drawings and specifications herein are property of the Company and shall not be reproduced or copied or used without prior written permission.
16
25
Page
of
Publicidad
