Enpuly MLG1 Manual Del Usuario página 5

EN
C. Water injection method 2:
Remove the water tank
a:Hold the body and twist the water tank to remove the water
tank.
b:Fill water to the MAX water level.
C:Install the water tank, and then rotate the water tank
until it is aligned with the lock mark. Then the installation is
completed.
D. Mode Description
1.Start：Press the start button to wake up the water flosser.
The indicator light will be turned on successively and then
stay in the former mode before last shutdown. The indicator
light of this mode will be steady on. If it is used for the first
time, it defaults to sensitive mode.
2.Pause：This button can be used to pause the water irrigation
while the power indicator lights. If there is no operation
within 10 seconds after the pause, the water flosser will
automatically shut down and the power indicator will be
turned off.
3.One-button boost function:When your water flosser works
in sensitive, medium or standard modes, you can press
the mode button long to start one-key pressure boost.
This function can make the water pressure rise steadily to
the maximum pressure.The indicator light will rise and fall
accordingly.
4.Mode switch button：Except for the start button, this mode
switch button can also be used to turn on the water flosser
either. When the water flosser is on working, you can use
this button to switch different modes, from intense, normal,
medium to sensitive and pulse mode.
(The following table describes indicators in different modes)
MAX
5
LED indicator status（From the
bottom）
The 2nd, 3rd, 4th and 5th mode
lights are on
The 2nd, 3rd and 4th mode lights
are on
The 2nd and 3rd mode lights are
on
The 2nd mode light is on
The 1st mode light is on
Start
❖
Press the start button. After the indicator lights up, press
the start button again to use. (the flosser factory default is
sensitive mode)
Pause
❖
Press the start button to pause the water flow.
Shutdown
❖
Press the start button during work to stop the water flosser.
In standby, the LED light will keep on for 10S and then
automatically shut down.
Mode Switch
❖
Press the mode switch to turn to different modes.
Memory function
❖
The last working mode is activated by default after each start.
E. How to use it：
1.Choose the nozzle that
suits your needs and install
it on the water flosser.
3.Press the mode switch to
select the mode that suits
you.
Model name
Intense
Normal
Medium
Sensitive
Pulse
2.Open the water tank cap,
add an appropriate amount
of water, and close it.
4.Place the nozzle between
your teeth and press the
start button to start washing.
6
EN