Sokkia SET300 Manual Del Operador página 109

Input commands
The following commands are used to input various data from a computer to the
SET. " " means space (20H).
• Entered angle and distance values are displayed in the selected display units.
• For inputting an angle, the decimal point should be entered after the degree
value when keying-in an angle value:
E.g. 359° 59' 59" → 359.5959
Command transmit and data output
When an input command(/) is transmitted from the host computer to
the SET, the SET transmits the reception condition code to the host
computer. (ACK/NAK communication control)
1. 06H(ACK): Data communication has succeeded, request next
command sending.
2. 15H(NAK): Data communication has failed, request the same
command sending.
SET
Normal
After 0.7 secs
reception,
and
completion
Unusual
After 0.7 secs
reception or
irregular
completion
Nothing
received
23. DETAILS OF DATA INPUT / OUTPUT
06H (ACK)
is sent
15H (NAK)
is sent
Nothing
sent
06H (ACK)
received
15H (NAK)
received
103