Victron energy MultiPlus Compact 24 2000 50-30 230V Manual página 3

1. SAFETY INSTRUCTIONS
General
Please familiarize yourself with the safety features and instructions by first reading
the documentation supplied with this product before using the equipment. This
product has been designed and tested in accordance with international standards.
The equipment must be used exclusively for the purpose for which it was designed.
WARNING: ELECTRIC SHOCK HAZARD.
The product is used in conjunction with a permanent energy source (battery). Input
and/or output terminals may still be dangerously energized, even when the
equipment is switched off. Always switch off the AC supply and the battery before
carrying out maintenance or servicing the product.
The product has no internal user-serviceable components. Do not remove the front
plate or operate the product if any panels have been removed. All servicing must
be undertaken by qualified personnel.
Never use the product where there is a risk of gas or dust explosions. Consult the
battery manufacturer's information to ascertain that the product is intended for use
in conjunction with the battery. Always comply with the battery manufacturer's
safety instructions.
WARNING: Do not lift heavy loads without assistance.
Installation
Read the installation instructions in the installation manual before installing the
equipment.
This is a Safety Class I product (supplied with a protective grounding terminal).
Uninterruptible protective grounding must be provided at the AC input and/or
output terminals. Alternatively, the grounding point located externally on the
product may be used. Whenever it is likely that the grounding protection has been
damaged, the product must be turned off and secured against unintended
operation; please contact qualified service staff.
Ensure that the DC and AC input cables are fused and fitted with circuit breakers.
Never replace a safety component with a different Typ. Consult the manual to
determine the correct component.
Before applying power, ensure that the available power source matches the
configuration settings of the product as described in the manual.
1