Trix 724 Manual Del Usuario página 13

CV Discription
1 Address
2 PoM Minimum Speed
3 PoM Acceleration delay
4 PoM Braking delay
5 PoM Maximum speed
8 Factory Reset / Manufacturer Recognition
13 PoM Functions F1 - F8 in analog operation
14 PoM Functions F9 - F15 and lights in analog operation
17 Extended address (upper part)
18 Extended address (lower part)
19 Multiple Unit Address
21 PoM Functions F1 - F8 on Multiple Unit
22 PoM Functions F9 - F15 and lights on Multiple Unit
Bit 0: Reversing direction of travel
Bit 1: Number of speed levels 14 or 28/128*
29 PoM
Bit 2: DCC operation with a braking area (no analog operation
possible)
Bit 5: short / long address
Alternative Protocols (DCC cannot deactivate itself)
Bit 0 : Analog AC off = 0 / Analog AC on = 1
50 PoM Bit 1 : Analog DC off = 0 / Analog DC on = 1
Bit 2 : fx (MM) off = 0 / fx (MM) on = 1
Bit 3 : mfx off = 0 / mfx on = 1
63 PoM Volume
* The speed levels on the locomotive decoder and on the controller must agree with each other; otherwise,
you may have malfunctions.
DCC Value
1 - 127
0 - 255
0 - 255
0 - 255
0 - 255
8
0 - 255
0 - 255
CV 29, Bit 5 =1
CV 29, Bit 5 =1
0 - 255
0 - 255
0 - 255
0 / 1
0 / 2 0, 1, 2, 3, 4, 5, 6,
0 / 4 7, 32, 34, 35, 36,
37, 38, 39
0 / 32
0 / 1
0 - 15
0 / 2
0 / 4
0 / 8
0 - 255
Factory-Set
3
5
50
50
172
131
0
1
192
128
0
0
0
6
15
255
13