Manual store
This menu is used to store the programmes one
at a time.
H
&
Press the
key.
î
é
With the
key, select Manual Store and
¬
îÏ
press
. Use the
Ȭ
setting and the
keys to adjust. :
Manual Store
$
System
Manual Store
Æ
• Search
• Program No.
• Fine Tune
• Store
"
System: select
(automatic detection*) or
Europe
(BG standard), East Europe (DK
West Europe
Other settings in the menu
H
&
Press the
key.
îÏ
é
Use the
keys to select a setting and the
Ȭ
keys to adjust. :
..... I ...... 42
Í
!
Brightness
• Brightness: this changes picture brilliance.
Other functions
'
keys to select a
Europe Æ
(
§
è
!
ç
• Colour: this changes the intensity of the colour.
• Contrast: this changes the difference between
• Sharpness: this changes the picture definition.
• Balance : this balances the sound on the left and
Brightness
Colour
Contrast
• Rotation (if available) : adjusts the angle of the picture.
Sharpness
• Auto Store: to start automatic search for all
Æ
Balance
Rotation
Auto Store
Manual Store
"
Connecting peripheral equipment
Use the euroconnector socket located at the back of the set or the front
AV connections (when available). Certain versions are equipped with
2 euroconnectors EXT1 and EXT2.To select connected equipment, press
n
several times the
key.
Most equipment (decoder,VCR) carries out the switching itself.
Headphones socket (only available on certain versions)
When headphones are connected, the sound on the TV set will be cut.
@"#
The
keys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 Ohms.
Amplifier (only available on certain versions)
To connect to a hi-fi system, use an audio connection cable and connect
the "L" and "R" outputs on the TV set to the "AUDIO IN" "L" and "R"
input on your hi-fi amplifier.
The keys on the TV set
The TV set has 4 keys : VOLUME - + (-
To access or exit the menus, press simultaneously the
keys.Then use the - P + and -
standard), UK (I standard) or France (LL' standard).
* Except for France (LL' standard), you must select
choice France.
¬
Search: press
.The search starts. Once a
programme is found, the scanning stops. Go to
the next step. If you know the frequency of the
required programme, this can be entered directly
0
9
using the
to
keys. If no programme is found,
see Tips chapter at the end of the instruction for use.
Program No.: enter the required number with
Ȭ
0
9
the
or
to
keys.
Fine Tune: if the reception is not satisfactory,
Ȭ
adjust using the
keys.
¬
Store: press
.The program is stored.
'
è
Repeat steps
to
for each programme to store.
d
To quit the menus, press
.
the light and dark tones.
right speakers.
programmes available in your region.Then, you
need to use the Manual Store menu to
renumber the programmes (see p. 1).
To quit or interrupt the search, press
d
To quit the menus, press
.
"
+) and PROGRAM - + (- P +).
"
"
+ keys to select and adjust.
H
.
"
- and
+
3