Orbegozo DS 59160 IN Manual De Instrucciones página 21

DS 59160 IN / DS 59190 IN
BULB 2W max
(9) SETTING UP AND CHANGING THE ACTIVE CARBON FILTER
This system is used in locations without ducting to the outside or when it is not possible to install such
ducting.
Disconnect the machine from the mains.
A. Remove metal filters.
B. The circular filters (Figure 2) are located at either end of the motor. Turn the carbon filters anti-
clockwise until they are unscrewed.
C. Apply reverse procedure to install the carbon filter.
Warning: the active carbon filter cannot be washed or recycled. It should be changed at least every
four months.
DS 59160 DS 59190
21