Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS INCLUDED:
F 6 mm T-Wrench
F 5 mm L-Wrench
PARTS INCLUDED:
F 1 Console Assembly
F 2 Console Masts
F 2 Lower Console Mast Covers
F 1 Accessory Tray
F 1 Hardware Kit
F 1 Safety Key
F 1 Audio Adapter Cable
F 1 Bottle of Silicone Lubricant
(for 2 applications)
F 1 Crossbar
F 1 Power Cord
F 2 Console Connection Covers
NEED HELP?
If you have questions or
if there are any missing
parts, contact Customer
Tech Support. Contact
information is located on the
back panel of this manual.
PRE ASSEMBLY
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place
a protective covering on your floor. Take CAUTION when handling and transporting
this unit. Never open box when it is upside down or on its side. Once the red
banding straps have been removed, do not lift or transport this unit unless it is fully
assembled and in the upright folded position, with the lock latch secure. Unpack
and assemble the unit where it will be used. The enclosed treadmill is equipped
with high-pressure shocks that may spring open if mishandled. Never grab hold of
any portion of the incline frame and attempt to lift or move the treadmill. Transport
unit ONLY on the ground, and ONLY after it is fully assembled and in the upright
folded position with the lock latch secured.
WARNING
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift
treadmill from packaging until specified to do so in the assembly
instructions. You may remove the plastic wrap from console masts.
WARNING
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
9
Publicidad
