Publicidad
Idiomas disponibles
Idiomas disponibles
• Check that the temperature of the place where the machine is installed is above
0°C or place it indoors.
Install the machine correctly according to the applicable standards and
•
regulations.
• When installed on carpeted floor, proper ventilation must be ensured at the
base of the machine.
• There are many pests in populations. The environment around the machine
must be kept clean to avoid damage caused by cockroaches or other pests, as
they are excluded from the warranty.
Transport bolts
The washing machines are fitted with transport bolts to prevent internal damage
during transport.
Disassembly of the transport bolts
1. To prevent internal damage during transportation, 4 bolts are installed. Before using
the machine, the bolts must be removed (see figure 1).
Failure to remove the bolts will result in strong vibrations, noises and problems.
2. Use the included spanner to loosen the 4 bolts (see figure 2).
3. Slightly twist the rubber on the bolts and then remove the bolts, and store the bolts
and the spanner (see figure 3).
When transporting the washing machine, the bolts must always be refitted.
4. Use the enclosed plugs to seal the bolt holes (see figure 4).
Installation instructions
Warning: Do
not
disassemble
the fixing
device of the
water outlet
pipe.
Figure 1
Figure 2
5
Figure 3
transport
bolt plug
Figure 4
V.2
Publicidad
