Use Your Robovac With Amazon Alexa / The Google Assistant; Set Up Physical / Virtual Barriers - EUFY RoboVac L70 Hybrid Manual Del Propietário

English
6. Empty any remaining water from the water tank. Clean the mopping cloth to avoid it
being mildewed and producing unpleasant smell.
• It is recommended to clean the mopping cloth after mopping each time.
• Remove the mopping module when RoboVac is under charging or not in use.
Use Your RoboVac with Amazon Alexa / the Google
Assistant
Amazon Alexa or the Google Assistant is a smart voice control device that enables you to
control RoboVac with your voice.
Before you start, make sure that:
• RoboVac is attached to the Charging Base to ensure there is enough power.
• RoboVac is connected with the EufyHome app.
• You have an Alexa-enabled device (i.e. Amazon Echo, Echo Dot and Amazon Tap, Echo
Show, Echo Spot) or a device enabled with the Google Assistant (i.e. Google Home,
Google Home Mini). These devices are sold separately.
• The Amazon Alexa app or Google Home app is already installed on your smart device,
and you have created an account.
To control RoboVac with Amazon Alexa or the Google
Assistant
1. Open the EufyHome app and tap "Smart integrations" in the top left.
2. Follow the on-screen instructions to complete the setup.
- Currently this feature only supports English, German, French, and Spanish.
You can check regularly if more languages are supported at
https:/ /www.eufylife.com/support/.
26

Set Up Physical / Virtual Barriers

Boundary Strips (Sold Separately)
Physical barriers including boundary strips can keep RoboVac away from cleaning certain
24h
areas. RoboVac will recognize the barriers and will not cross into the blocked-off area.
1. Identify the area or item you do not want RoboVac to get close to.
2. Place the boundary strips FLAT on the floor or under an area rug.
• Make sure the boundary strips are placed on the same surface plane RoboVac
• If the boundary strips are rolled up, remove and then re-apply on the floor with
Virtual Boundary (Available on the App Only)
In the EufyHome app, you can set up a "No-Go Zone" or "No-Mop Zone" as a restricted
area. This eliminates the need to use physical barriers, including Boundary Strips. This
feature is designed for dividing the cleaning zones, not for isolating hazardous areas.
• No-Go Zone: RoboVac will not enter the zone to vacuum or mop.
• No-Mop Zone: RoboVac will not enter the zone to mop, while vacuuming is still allowed.
• To set a virtual boundary, RoboVac must initially perform a cleaning run to
• To clean your home with virtual boundary, ensure that RoboVac is on the
• Although a virtual boundary is set, RoboVac may still enter the restricted zone
• Moving the device or changing the environment may cause mapping failed
is used on.
adhesive tape. Otherwise the boundary strips may not work well.
create a floor plan.
Charging Base and that the Base has not been manually moved during
cleaning.
due to such reasons as relocalization, wrong positioning or abnormal sensors.
and rebuilt with virtual boundary lost.
English
27