Voice Alert; Voice Prompt - EUFY RoboVac L70 Hybrid Manual Del Propietário

English

Voice Alert

When RoboVac encounters a problem, the red indicator on RoboVac will be flashing and
you will hear the relevant voice prompts. Follow the voice prompts to solve the problems.

Voice Prompt

Front bumper is stuck. Tap it repeatedly to remove any
dust;
Error 1: Front bumper stuck
if not, then move the device to a new position and try
again.
Wheel may be stuck or trapped. Clear any obstacles
Error 2: Wheel stuck. Check
in the surrounding area and check the wheel for any
the wheel and move it to a new
trapped dust. Move the device to a new position and
position.
try again.
Error 3: Side brush stuck Side brush may be stuck. Please clean it and try again.
Error 4: Rolling brush stuck. Remove the rolling brush, roller joint, roller brush cover,
Remove and clean the rolling and suction inlet to clean it. Once cleaned, place the
brush. items back into the device and try again.
Error 5: Device trapped. Clear Device is trapped. Clear any obstacles in the
the surrounding area. surrounding area and try again.
Device may be suspended in air. Move it to a new
Error 6: Device trapped. Place
position close to the original position and try again. If
device near the position where
the device is still unable to start, clean the edge sensor
the problem occurred.
and try again.
Error 7: Wheel suspended. Wheels may be suspended in air. Move the device to
Please move the device to a new a flat surface and a new position close to the original
position. position then try again.
Error 8: Low battery, shutting
Low Battery; system will shut down. Charge the device
down device. Please charge your
and try again.
device.
Error 9: Magnetic Boundary
Device is too close to a strong magnetic field or strip.
Strip detected. Move device to a
Move the device to a different area and try again.
different area.
Error 11: Front infrared sensor Front infrared sensor is blocked by dust and requires
needs cleaning. cleaning.
Error 12: Right wall sensor needs Clean the right side wall sensor since it's covered in
cleaning. dust.
Error 13: Device tilted. Please
Device may be tilted. Put the device on a flat surface
put the device on a flat surface
and try again.
to start.
38
Cause and Solution
Voice Prompt
Error 14: Please insert dust Put the dust collector and filter back in and confirm
collector and filter. that they are in place. Then restart the device.
Error 17: Restricted area
Device is too close to the restricted area. Move the
detected. Move device to a
device to a new position and try again.
different area.
Error 18: Laser cover may be Pressure sensor for laser cover is stuck. Move the
stuck. device to a new position and try again.
Error 19: Laser sensor may be Laser ranging sensor is covered in dust. Clean it and try
stuck. again.
Laser sensor is blocked by:
• An empty environment
Error 20: Laser sensor may be
• Metal mirrors
blocked.
• Other multi-reflection devices
Remove any obstacles and move the device to a
different area.
Error 21: Charging Base blocked Charging base is blocked by obstacles, clear any
by surrounding obstacles obstacles around the charging base and try again.
- Open the battery compartment and check whether
the battery is connected and restart the device.
Error S1: Battery Error. Refer - Battery Temperature may be too high or low; wait
to Owner's Manual or App for until the battery falls to normal temperatures before
help. usage (0 ° ~ 40 ° C/C 32 ° F to 104 ° F).
- If the issue persists, contact customer support for
help.
- Check whether the wheels are stuck or dust is
Error S2: Wheel Module Error.
trapped inside before restarting the device.
Refer to Owner's Manual or App
- If the issue persists, contact customer support for
for help.
help.
- Check whether the side brush is stuck in an unknown
Error S3: Side Brush Error. Refer
object before restarting the device.
to Owner's Manual or App for
- If the issue persists, contact customer support for
help.
help.
- Check whether the fan blades are stuck in an
unknown object before restarting the device.
Error S4: Suction Fan Error. Refer
- Clean the dust collector and filter before restarting
to Owner's Manual or App for
the device.
help.
- If the issue persists, contact customer support for
help.
English
Cause and Solution
39