Honeywell Home RET97E5D Wi-Fi Serie Guia Del Usuario página 16

Installing your thermostat
Wiring (conventional system)
7A Wire the Wi-Fi thermostat to your conventional
system.
a Starting with the C Wire, match the sticky tag on
the wire to the terminal labels.
You must have a C wire. See page 13.
b Loosen screw, insert wire on inside edge
of terminal, then tighten screw.
c Verify wire is firmly secured by gently
pulling on wire.
d Repeat steps a–c for all other wires.
e Push any excess wire back into the wall
opening after all wires are installed.
f Continue to page 20.
Labels don't match?
wiring key on pages 16–17.
69-2803ES—05
See alternate
14
Remove metal
jumper only
have both R and RC
wires
W2 G W C
K Y2 Y R RC
K L G O/B C Y
AUX/E
Note: The wiring for your
application might be
different from the wiring
shown above.
if you
CONVENTIONAL
R RC
HEAT PUMP
MCR33878