Belkin F5U302ea Manual Del Usuario página 26

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 141
1
2
3
4
5
6
5427ea_F5U302ea_man.indb 22
Maintenance
Check the blue LED status lights on both the Wireless
USB Adapter and Hub. When there is a good wireless
connection between the two, the blue LEDs flash at a
constant rate.
Open the "Wireless USB Control Center" application,
select the "Advanced" tab, and try changing to a different
channel. Then, see if the devices will connect.
Ascertain that power is being applied to both devices
(you can refer to the power LEDs at this point for
verification). Try resetting the power to both devices, and
then try the connection again.
Verify that the host USB port on your system (the one to
which you have connected the Hub) works properly. Do
this by connecting another USB device to it.
If you are using any additional extension cables for
connection, please remove them, and then retest the
connection.
If possible, try the entire Hub and Adapter installation
process on another PC to determine if there is a problem
with only the current system.
EN-22
12/19/2007 3:40:34 PM

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido