9. Specification
1
Maximum cutting
2
Rated Voltage
3
Rated Power
4
Rated Current
5
Current Protection Stop Point
6
Protection Level
7
Weight
1
Capacity
2
Voltage
3
Operating Hours
4
Weight (battery)
1
Input Voltage
2
Output Voltage
3
Recharging Current
4
Protection Level
5
Charging Time
* 3000 cuts/battery – Cutting Ø = 15 – 20 mm
10. Charging the Battery
Do not dispose battery under high temperature or vibration environment to avoid liquid
leakage from the battery.
isconnect the battery from tool before charging.
D
Always make sure the battery is dry and clean before charging.
•
Make sure the battery is fully charged before first time using.
•
The battery is not fully charged when you buy, you must charge 2-3 hours before using first time.
•
Before recharging the battery, check the remaining charge on the display.
Pruning Shear specifications
Battery (lithium-ion)
Charger
25mm (live branches)
15mm (dead branches)
DC14.4V
150 W
10.4 A
≥45A
Ⅱ
0.70Kg
2.5 Ah
14.4V
4 h *
0.25kg
100-240V AC ,50-60Hz
DC16.8V
1.0A
Ⅱ
2-3 h
35