Sony SSC-CR512 Manual De Instrucciones página 11

0 LUX SHOT sub menu (SSC-CR712/712P
only)
Selects the setting when shooting in the dark.
0 LUX SHOT
0 LUX SHOT
I R LED
EX I T
Function
Selection
0 LUX SHOT
ON: The infrared ray cut filter is removed
and it is possible to shoot pictures in the
dark. The picture is displayed in black
and white mode.
OFF: 0 LUX SHOT function does not work.
IR RED ON: The built-in LED lights when 0 LUX
SHOT is set to ON.
OFF: The built-in LED does not light even
if 0 LUX SHOT is set to ON.
Notes
• Never use the 0 LUX SHOT function in a bright
outdoor place. It may cause a malfunction.
• Set IR LED to OFF if the LED reflected in the
attached dome cover appears on the screen.
CAMERA ID SET sub menu
You can display the ID when the camera ID is set and
CAMERA ID is set to ON.
You can set the camera ID in the same way as "Setting
the preset label or area label" on page 12.
OFF
OFF
Note
You can go back to the main menu from this menu.
Press the MENU key on the controller to clear the
menu display.
11
(GB)