Sony SSC-CR512 Manual De Instrucciones página 6

Location and Function of Controls
Attaching the dome cover to the camera
6
(GB)
1
Remove the lens cap from the lens of the camera.
2
Align screw hole (A) of the dome cover with screw hole (A) of the
camera. Then, push the dome cover upward.
3
Tighten with the supplied M3 × 4 screw.
To remove the dome cover
Remove the screw, then turn the dome cover to clockwise or
counterclockwise and pull it down.
Notes
• Do not leave fingerprints on the dome cover, otherwise the picture quality
declines.
• When the dome cover is attached and the camera moves to the horizontal
position, the upper half of the picture may become dark.
A