EINHELL TE-IG 3500 Manual De Instrucciones página 25

10. Troubleshooting
Fault
Engine does not
start
Generator has too
little or no
voltage
The battery does
not charge up
Starter does not
turn
Anl_TE_IG_3500_SPK13.indb 25 Anl_TE_IG_3500_SPK13.indb 25
GB
Mögliche Ursache
Automatic oil cut-out has not respon-
ded
Spark plug fouled
No fuel
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air fi lter dirty
Poor contact to the battery
Battery defective
12 V safety trip has been triggered.
Battery discharged
Battery not connected
- 25 -
Behebung
Check oil level, top up engine oil
Clean or replace spark plug (electro-
de spacing 0.7-0.8 mm)
Refuel / have the petrol cock checked
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the fi lter
Clean the contacts
Have the battery checked by an ex-
pert and replace it if necessary
Check the function of the equipment
using a diff erent battery; Actuate the
12 V safety trip.
Charge the battery
Connect the battery
22.06.2022 08:42:25 22.06.2022 08:42:25