Motor Cooling Fan Inspection And Cleaning; Tightness Inspection; Disposing Of The Vacuum Cleaner; Wiring Diagrams - Nilfisk VHW310 Manual De Instrucciones

VHW310 - VHW311

Motor cooling fan inspection and cleaning

Periodically clean the motor cooling fan to prevent the motor
from overheating, especially if the device is used in a dusty
place.

Tightness inspection

1. Blower connecting hose
2. Vacuum hose
Hoses check
Make sure that connecting hose (1) is in a good condition and
correctly fixed.
If the hose is damaged, broken or badly connected to the
unions, it must be replaced.
When sticky materials are treated, check for possible clogging
along the hose (2), in the inlet and on the baffle plate inside
the container.
Scrape the inlet from the outside and remove the deposited
waste as indicated in the figure.
GB
C391
Figure 12

Disposing of the vacuum cleaner

Dispose of the vacuum cleaner in compliance with the laws in
force.
■ Proper disposal (electric and electronic waste).
(Applicable in the European Union and in countries
providing a separate collection system)
The above symbol (Fig. 13), which is present on the product
or in its documentation, indicates that the product cannot be
disposed of together with other domestic waste at the end of
its life cycle.
To prevent damage to the environment or health caused by
improper waste disposal, please separate this product from
other waste and recycle it responsibly in order to support the
sustainable reutilisation of material resources.
This product can not be disposed of together with other
commercial waste.

Wiring diagrams

Basic model
1. Plug
2. Vacuum cleaner
3.
Circuit breaker
Item Part
Circuit breaker
Q1
Box for Q1
10
Figure 13
Figure 15
Code
VHW310
VHW311T
(if equipped)
Z8 39319 Z8 39319
Z8 39932 Z8 39932
01/2015