Publicidad
Idiomas disponibles
Idiomas disponibles
Dimensions and Cabinet Requirements
General Cabinet Requirements
A space of ¼" (6.4 mm) is required between the side
▯
of the appliance and an adjacent wall or cabinet door
when installed at the end of a cabinet run.
The cabinet base must be flat and capable of
▯
supporting the weight of your appliance when in use.
For combination units consult the section Cabinet
Dimension Requirements in the installation manual of
your combination appliance.
The appliance door will overlap the furniture below by
▯
approx. 3/16" (5 mm) when opened. If necessary, you
can elevate the appliance position by adding a panel
in the required thickness on top of the supporting
base. The supporting base must be level and securely
fixed to the cabinet.
Outlet Area
Anywhere within the shaded area the minimal distance
between the appliance and the wall is 1¾ in (45 mm).
The outlet can be located anywhere within the shaded
area.
Appliance Dimensions
8
Cabinet Dimensions
Wall installation
NOTICE: The cabinet base must be flat and capable of
supporting a weight of at least 142 lbs (64.1 kg).
Under counter installation
Publicidad
