Descargar Imprimir esta página

DeWalt DPC10QTC-QS Manual De Instrucciones Y Seguridad página 7

Ocultar thumbs Ver también para DPC10QTC-QS:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 108
Read the Instruction Handbook:
Before positioning, operating or adjusting the
compressor, read the instruction book carefully.
MARKINGS ON TOOL
The following pictograms are shown on the tool:
RISK OF ELECTRIC SHOCK:
CAUTION: before doing any work on the compressor, it
must be disconnected from the power supply.
RISK OF HIGH TEMPERATURES:
CAUTION: the compressor contains some parts which
might reach high TEMPERATURES.
RISK OF ACCIDENTAL START-UP:
ATTENTION: the compressor could start automatically in
case of a black-out and subsequent reset.
RISK OF BURSTING:
Failure to properly drain tank may result in excessive
tank corrosion causing air tank rupture or an explosion.
HEARING, EYE AND RESPIRATORY
PROTECTION MUST BE WORN
IMPORTANT INFORMATION
Read and understand all of the operating instructions, safety
precautions and warnings in the Instruction Manual before
operating or maintaining this compressor. Most accidents
that result from compressor operation and maintenance
are caused by the failure to observe basic safety rules or
precautions. An accident can often be avoided by recognizing
a potentially hazardous situation before it occurs, and by
observing appropriate safety procedures. Basic safety
precautions are outlined in the "SAFETY" section of this
Instruction Manual and in the sections which contain the
operation and maintenance instructions. Hazards that must
be avoided to prevent bodily injury or machine damage are
identified by WARNINGS on the compressor and in this
Instruction Manual.
INTENDED USE
Use the D
WALT compressor only for the purpose for
e
which it was designed, such as: pneumatic nailing
tools, tyre inflating etc. Always ensure that the tool you are
connecting has a suitable air pressure value.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
This unit is a professional compressor. DO NOT let children
come into contact with the compressor. Supervision is
required when inexperienced operators use this tool.
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
All manuals and user guides at all-guides.com
MEANINGS OF SIGNAL WORDS
m DANGER: indicates a potentially hazardous situation
which, if ignored, will result in serious personal injury.
m WARNING: indicates a potentially hazardous situation
which, if ignored, could result in serious personal injury.
m CAUTION: indicates a hazardous situation which, if
ignored, could result moderate personal injury.
NOTE: emphasizes essential information
Safety instructions
IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE
COMPRESSOR.
m WARNING: DEATH OR SERIOUS BODILY INJURY
COULD RESULT FROM IMPROPER OR UNSAFE USE OF
COMPRESSOR. TO AVOID THESE RISKS, FOLLOW THESE
BASIC SAFETY INSTRUCTIONS.
READ ALL INSTRUCTIONS
1. NEVER TOUCH MOVING PARTS Never place your hands,
fingers or other body parts near the compressor's moving
parts.
2. NEVER OPERATE WITHOUT ALL GUARDS IN PLACE
Never operate this compressor without all guards or safety
features in place and in proper working order. If maintenance
or servicing requires the removal of a guard or safety
features, be sure to replace the guards or safety feature
before resuming operation of the compressor.
3. ALWAYS WEAR EYE PROTECTION Always wear safety
goggles or equivalent eye protection. Compressed air must
never be aimed at anyone or any part of the body.
4. PROTECT YOURSELF AGAINST ELECTRIC SHOCK
Prevent body contact with grounded surfaces such as pipes,
radiators, ranges and refrigeration enclosures. Never operate
the compressor in damp or wet locations. Never leave the
compressor exposed to adverse weather conditions.
5. DISCONNECT THE COMPRESSOR WHEN NOT IN USE
Always disconnect the compressor from the power source
and remove the compressed air from the air tank before
servicing, inspecting, maintaining, cleaning, replacing or
checking any parts.
6. AVOID UNINTENTIONAL STARTING Do not carry the
compressor while it is connected to its power source or
when the air tank is filled with compressed air. Be sure the
ON/OFF switch is in the OFF position before connecting the
compressor to its power source.
7. STORE COMPRESSOR PROPERLY When not in use, the
compressor should be stored in dry place. Keep out of reach
of children. Lock-out the storage area.
8. KEEP WORK AREA CLEAN Cluttered areas invite injuries.
Clear all work areas of unnecessary tools, debris, furniture etc.
ENGLISH
5

Publicidad

loading

Este manual también es adecuado para:

Dpc10qtc-gbDpc10qtc-lx