Publicidad
Idiomas disponibles
Idiomas disponibles
EN
NOTE
UL applications
For UL applications, use is only permitted in class 2 circuits in accordance
with the NEC (National Electric Code).
NOTE
Protective Extra Low Voltage (PELV)
The device is designed in accordance with safety class III for supply with
PELV (protective extra-low voltage).
Technical data
NOTE
Technical data
Additional specifications and notices for using the device can be found in the
technical description.
Device without heater
Optics
Light source
Laser class
Transmitter (infrared light)
Alignment laser (red light)
Data Transmission
Electrical equipment
Switching input
Switching output
Operating voltage U
Current consumption
18
Laser diode
1M acc. to IEC 60825-1:2007
1
acc. to IEC 60825-1:2007
Ethernet
All protocols based on TCP/IP and UDP
Transmission rate: 100 Mbit/s
Transmission: full duplex
Auto-crossover possible
18 ... 30 V DC
Transmitter not active
0 ... 2 V DC
Transmitter active
+18 ... +30 V DC: received signal level ok
0 ... 2 V DC: intensity warning
18 ... 30 V DC
B
For UL applications: only for use in "class 2" circuits in accor-
dance with NEC.
Approx. 200 mA at 24 V DC (no load at switching output)
Publicidad
