Fanimation The Quattro FP8050 Manual Del Propietário página 10

How to Assemble the Blades and Light Kit (continued)
4. Insert light bulb and twist until light bulb terminals
have seated properly in the GU10 socket. (Figure 4)
5. Twist on Lower Light Kit Cover by aligning
pin slots in Upper Light Kit Plate (Figure 5).
How to Operate Your Ceiling Fan
1. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box (Figure 1).
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until the blades are in place. Noise and
fan damage could result.
2. To make fan operational, install two piece of 3-volt
battery in hand-held remote transmitter, (if not using
for long periods of time, remove battery to prevent
damage to transmitter). Store the remote away
from excessive heat or humidly (Figure 2).
3V, CR2032
BATTERY
2 PCS
REMOTE
CONTROL
10
LIGHT BULB
Figure 4
LOWER LIGHT
KIT COVER
Figure 5
MAIN FUSE BOX
Figure 1
Figure 2