Samsung WF338 Serie Manual Del Usuario página 15

FOR SILVERCARE™ WASHING
Extra delicate blouses, shirts, or even lingerie that can't be washed in hot water can now be sanitized
effectively without the adverse effects of hot water. The silver plates can easily be replaced by a Service
Technician if needed.
To use :
1. Load the washer.
2. Press the Power button.
3. Select a Cycle by turning the Cycle Selection dial.
4. Press the SilverCare™ button.
5. Add detergent in the dispenser tray for main washing, and add fabric softener up to the marked line.
6. Press the Start/Pause button.
: The washer automatically selects optimal washing conditions by sensing the laundry's weight.
FOR HOME USE ONLY– COMMERCIAL USERS SHOULD NOTIFY THEIR LOCAL WASTE
TREATMENT AUTHORITIES BEFORE USE
To display the total number of silver cycles performed by the washer, press both the Signal and SilverCare™
buttons at the same time and hold them down for 3 seconds.
LU1 : less than 1000 times
LU0 : 1000 times
You should replace the SilverCare™ kit when the display reads "LU0" as the electrodes are near the end of
their useful life. Contact 1-800-SAMSUNG.
You cannot choose the SilverCare™ option with the Wool cycle.
USING STEAM WASH
Injects steam directly onto the laundry in the wash tub to increase the wash temperature and enhance the
Soak effect, improving the wash performance.
1. Load the washer.
2. Press the Power button.
3. Turn the Cycle Selector and select a Steam Cycle. (The Deep Steam course automatically selects
Steam.)
4. Press the Steam button.
5. Add detergent into the dispenser tray for a wash, and add fabric softener up to the marked line.
6. Press the Start/Pause button.
: The washer automatically selects the optimal wash conditions by sensing the weight of the laundry.
If steam wash is selected, steam is injected at the most effective time for the detected amount of
laundry in order to maximize the effect of the steam.
Steam is injected 8 minutes after the start of the cycle. Steam is injected for 1.5 seconds and then
stops for 13 seconds. This operation is repeated for the next 16 minutes. The Steam function can
selected with standard cycles (except pre-wash).
WF338AA-02562A-01_EN.indd 15
Washing a load of laundry _15
2008-03-10 ¿ÀÈÄ 3:35:45