Anker NEBULA Capsule Pro Manual Del Usuario página 10

EN
Getting Started
1. Placement
Place this device on a surface table, flat table in
front of the projection surface. For best results, the
projection surface should be white and flat. The
distance between this device and the projection
surface must be a minimum of 0.58 meters (23") and
a maximum of 3.08 meters (121") to get a projection
image from 20 to 100 inches.
• It is unnecessar y to tilt it towards the
projection surface. You can correct the
T
projection image with the built-in keystone
correction.
• The distance between the device and the
projection surface determines the projection
image size. For the best result, set the
projection image ranging from 40 to 80 inches.
08