Anker NEBULA Capsule Pro Manual Del Usuario página 11

2. Preparing the Remote Control
① For first time use, remove the protective tab to
activate the remote control battery.
② To replace the battery, unlock and open the battery
compartment, insert a new battery positioning the
polarity (+/-) as indicated, and then close and lock the
battery compartment.
3. Get Started
① Fully charge the built-in battery before using for the
first time by using the provided cable and charger.
② Hold
for 2 seconds on the projector to power
on.
③ Turn the device towards a suitable projection
surface or wall.
④ Rotate the focus by adjusting knob to get the best
focus.
⑤ For first time use, follow the on-screen instructions
to complete the basic settings.
To give your Nebula Capsule Pro the fastest,
T
safest charge, use the supplied charger only.
EN
09