Publicidad
Step 28
Carefully stand your unit upright.
å
NOTE: Before inserting a drawer, be sure the INNER CARTRIDGE in the EXTENSION RAIL on your unit is all the way
å
forward. The INNER CARTRIDGE should click into place against the BLACK TAB.
To insert a drawer into your unit, line up the EXTENSION SLIDES on the drawer with the EXTENSION RAILS on the unit
å
and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is all the way in, then
it will slide in and out easier.
To insert the KEYBOARD SHELF (M) into your unit, tip the front of the SHELF down and drop the rollers on the SHELF
å
behind the rollers on the unit. Lift the front of the SHELF up and slide it into the unit.
Insert the GROMMET (10P) into the large hole in the TOP (E2). Then, insert a GROMMET CAP (1P) onto the GROMMET.
å
Click the inner cartridge into place against the black tab.
Front
Black tab
15 lbs.
30 lbs.
www.sauder.com/services
Inner cartridge
M
Left Drawers
30 lbs.
Extension Rail
E2
75 lbs.
15 lbs.
15 lbs.
418656
1P
10P
Right Drawers
Page 33
Publicidad
