Publicidad
Idiomas disponibles
Idiomas disponibles
INTENDED USE
The blower is intended for residential use only.
Use the blower outdoors to move yard debris
as needed.
BEFORE OPERATION
Assembling & Disassembling the
blower tube
To Assemble (Fig. A)
- Align the groove and push the tube onto the
blower housing until you hear a "click".
To Disassemble (Fig. B)
- Press the tube-release button and pull the
tube out.
Charging the battery pack (Fig. C)
- Your battery pack is partly charged and
needs to be fully charged before first use.
- More details can be found in charger's
manual.
WARNING! The charger and battery
pack are specially designed to work
together, so do not attempt to use any other
devices. Never insert or allow metallic objects
into your charger or battery pack connections
because of an electrical failure and hazard will
occur.
Checking the battery charge condition
(See Fig. D)
The battery level can be known from the
battery indicator light by pressing the button
beside the lights. Before starting or after use,
press the button beside the power indicator
light on the battery pack to check the battery
capacity.
Remarks
LED-light
Five green
lights are
illuminated.
Four green
lights are
illuminated.
Three green
lights are
illuminated.
Installing & Removing the battery pack
To Install (Fig. E)
- After recharging, insert the battery pack
To Remove (Fig. F)
- Press the battery release button to release
OPERATION
Air speed mode (FIG.G)
NOTE: The blower is in the air speed mode as
packed in the box.
- Air speed mode is recommended for
Air volume mode (FIG.H1,H2)
- Depress the nozzle release button and slide
- Air volume mode is recommended for
NOTE: To change modes, slide backward for
Battery condition
air speed mode.
To start
70% ≤ Power
Variable Speed Dial control (Fig. I1, I2)
level≤100%
Turn the Variable Speed Dial clockwise or anti-
clockwise to increase or decrease the blowing
speed / air volume with 3-speed switch.
50% ≤ Power
NOTE: When Variable Speed Dial is in "O"
level < 69%
position, the blower cannot be started. Turn
the Variable Speed Dial to the desired speed
selection which will start the blower.
35% ≤ Power
level < 49%
To stop (Fig. I3)
Turn the Variable Speed Dial clockwise to
"O"or depress the Trigger and release it to
have a quick stop. Turn the Variable Speed
Two green
lights are
illuminated.
One green
light are
illuminated.
No light is
illuminated.
into tool's battery port. A simple push and
slight pressure will be sufficient.
battery pack from your tool.
cleaning on grass, as shown in Fig. I1.
forward for air volume mode.
cleaning on hard ground such as cement,
as shown in Fig. I2.
20% ≤ Power
level < 34%
10% ≤ Power
level < 19%
Power level <
10%
13
EN
Publicidad
