Publicidad
Idiomas disponibles
Idiomas disponibles
Dial clockwise to "O" position after each use.
NOTE: After completing the quick stop,
Variable Speed Dial will not work until you have
the throttle trigger fully depressed.
USER TIPS
- Hold the blower tube approximately 8''
above the ground when operating the tool.
Use a sweeping motion from side to side.
Advance slowly keeping the accumulated
debris/leaves in front of you.
- After blowing the debris/leaves into a pile, it
is easy to dispose of the pile.
CAUTION!
- Do not blow hard objects such as nails,
bolts, or rocks.
- Do not operate the blower near bystanders
or pets.
- Use extra care when cleaning debris from
stairs or other tight areas.
- Wear safety goggles or other suitable eye
protection, long pants, and shoes.
Turbo button for power boosting (Fig.
J)
14
- Press the turbo button for power boosting
EN
while working to temporarily increase the
air flow to the maximum level
- Release the Turbo button, the blower will
return to the previously selected speed.
Note: Turbo button for power boosting can
increase air flow significantly, and it can be
used for clearing heavy or wet debris.
CLEANING THE TOOL
Clean the tool regularly.
WARNING! Keep your product dry.
Under no circumstances spray with
water.
- To clean the tool, remove battery and
use only mild soap and a damp cloth.
- Do not use any type of detergent,
cleaner or solvent which may contain
chemicals that could seriously damage
the plastic.
- Self lubricating bearings are used in
your product, therefore lubrication is
not required.
-
Assure that there is no debris blocking the
intake port area of the blower.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0 ℃-45 ℃ (32
℉-113 ℉).
The recommended ambient temperature range
for the charging system during charging is
0 ℃-40 ℃ (32 ℉-104 ℉).
Publicidad
