Publicidad
Idiomas disponibles
Idiomas disponibles
5.1
Installation
Preliminary work
–
Remove the seat.
Assembly
–
Mount the front of the seat
hing of the fuel tank, lower the seat at the rear, and push the
seat forward.
–
Make sure that the seat is locked in correctly.
All 4 loops are accessible.
H02218-11
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
500371-01
–
Remove screws
500372-01
–
Mount attachment strap
(all included) and tighten.
Guideline
Screw, sub-
frame
500373-01
–
NOTE
Info
These operations are the same on both side bags
–
Turn over the opening of the side bag (included) 3 times and
close using straps
–
Tighten straps
–
Close fasteners
500374-01
1
(included) on the collar bus-
9
.
M6
10 Nm (7.4 lbf ft)
bk
.
4
8
with bushings
M8x30
35 Nm (25.8 lbf ft)
bl
.
bl
.
bm
on both sides.
INSTALLATION 5
5
and screws
Loctite
®
2701™
9
Publicidad
