44 SMART FEATIRES
SmART FEATURES
Tag On (on some models)
Before Using Tag On
The Tag On function allows you to conveniently use
the LG Smart Diagnosis™, Cycle Download, Laundry
Stats and Tag On Cycle Set features to communicate
with the appliance from a smart phone. To use the
Tag On function:
1
Download the LG Smart Laundry & DW
application to the smart phone.
Turn on the NFC (Near Field Communication)
2
function on the smart phone. The Tag On
function can only be used with smart phones
equipped with the NFC function and based on
the Android operating system (OS).
Turning On the Smart Phone's NFC Function
1
Enter the Settings menu of the smart phone and
select Share & connect.
2
Set NFC to ON.
NOTE
Depending on the smart phone manufacturer and
Android OS version, the NFC activation process
may differ. Refer to the manual of the smart
phone for details.
Using the Tag On Function
The Tag On Icon
Look for the Tag On icon on the right side of the
dryer's control panel. Position the smart phone over
the icon when using the Tag On function with the LG
Smart Set features of the LG Smart Laundry & DW
application.
The NFC Antenna Position
When you use the Tag On function, position your smart
phone so that the NFC antenna inside the back of
your smart phone matches the position of the Tag On
icon on the appliance. (Because you cannot see the
position of the antenna, the LG Smart Laundry & DW
app will attempt to find it for you and show you a target
range for the antenna on your smart phone's screen.)
If the app is not able to show a target range, try
positioning the center back of your smart phone over
the Tag On icon on the appliance. If the connection
is not made immediately, move your smart phone
very slightly in a widening circular motion until the
application verifies the connection.
Because of the characteristics of NFC, if the
transmission distance is too far, or if there is a metal
sticker or a thick case on the phone, transmission will
not be good.
Press [
] in the LG Smart Laundry & DW app for
a more detailed guide on how to use the Tag On
function.