Tabla De Contenido; General Safety Rules - Festool DOMINO DF 500 Manual De Instrucciones

6
Table of contents
Safety rules ..................................................... 6
Tool description .............................................. 8
Technical specification .................................... 8
Symbols ........................................................... 8
Intended use .................................................... 8
Functional description .................................... 8
Setup ............................................................... 9
Setting up a new Domino Joiner ..................... 9
Setting the Fence Angle .................................. 9
Setting the Fence Height ................................. 9
Setting the Mortise Width ............................. 10
Setting the Mortise Depth ............................. 10
Changing the Mortising Bit ........................... 11
Operation ...................................................... 11
Plug it Power Cord ........................................ 12
Turning on the Joiner .................................... 12
Extension Cable ............................................. 12
Dust Extraction .............................................. 12
Using the stop latches................................... 12
Side stop with extension ................................ 13
Working with the machine ............................ 13
Overview, General Notes and Tips ................ 13
Joining - Procedure ...................................... 14
Maintenance ................................................. 15
Fixing the clamp lever .................................... 16
Changing the stop latches ............................. 16
Calibrating the Horizontal Position Gauge ... 16
Accessories, Tools ........................................ 17
Applications .................................................. 18
Troubleshooting ............................................ 21
Safety rules

General safety rules

Read and understand all instruc-
tions. Failure to follow all instructions listed below
may result in electric shock, fi re and/or serious
personal injury.
SAVE ALL WARNINGS AND INSTRUC
TIONS FOR FUTURE REFERENCE.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Un-
modifi ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and re-
frigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords in-
crease the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the infl uence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.