Publicidad
5.
Install the Drawers
Slide
Glissière
Corredera
Bearing Carriage
Support de butée
Carro de cojinetes
Installation
Fully extend the rails, then slide the carriages forward.
Align the grooves on the underside of the drawer with the rails, then set the
drawer into place.
Hold the drawer in place on the rails, then close the drawer. Repeat this step for
the remaining rail.
CAUTION: Risk of personal injury. To ensure the drawer is properly installed,
ensure the latches are engaged on the drawer.
Ensure the drawer is locked into place by lightly lifting the front of the drawer
upward. If the drawer does not lift up, it is properly engaged. If the drawer lifts
up, repeat the procedure.
Slide the drawer in and out of the vanity to ensure smooth operation.
Removal
Slide the drawer out on the rails until fully extended.
Press both release latches to the left, then pull the front of the drawer up off the
rails.
Lift the drawer out from the vanity.
Kohler Co.
Release Latch
Loquet de déblocage
Seguro de enganche
Rail/Rail/Riel
Release Latch
Loquet de déblocage
Seguro de enganche
13
1106935-2-B
Publicidad
