Publicidad
Idiomas disponibles
Idiomas disponibles
Setup
Set The Inputs
Use this feature to give a name to any of the seven video
inputs.
1. Press the CURSOR PAD
video inputs.
2. Press the CURSOR PAD
choices.
Note: The inputs labeled Gray out (Skip) or Hide
(Skip) are disabled in the INPUTS selection.
INPUT 3 Auto Link
Use this function to automatically turn the TV on and
tune to INPUT 3 when it detects a video signal to
INPUT 3.
1.
Use the CURSOR PAD
the AUTO LINK option and
between the Off and Auto settings.
- Auto
When AUTO is selected, the TV will turn on
and switch to INPUT 3 automatically, when the
INPUT 3 input device is turned on. This is
convenient when you want to watch a movie with your VCR, laserdisc player or DVD player.
- Off
Select OFF to disable this function.
2. Press EXIT to quit menu or select SET THE INPUTS to return to previous menu.
NOTE: 1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK
is used again. To do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and
will turn on your TV as described above.
2. If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will
automatically turn off after three hours.
Set AV Net
Use this feature to control your external Audio/Video
equipment using your HITACHI Plasma TV Remote
Control. The IR Blaster cable must be properly connected
for the AV NET feature to work (see page 24).
1. Press the MENU button.
2. Use the CURSOR PAD
feature.
3. Press the SELECT button to select.
4. Use the CURSOR PAD
feature.
5. Press the SELECT button to select.
or
to highlight the
or
to select your
or
to highlight
or
to select
to highlight SETUP
Set AV NET
to highlight SET AV NET
Setup
Setup The Menu Options
Set The Screen Saver
OR
Set The Inputs
Set The AV Net
Set The Closed Captions
Set The IR Out
CableCARD Information
Select The Quick Start Option
Reset The Software
Move
Select
SEL
Setup
Set The Inputs
Input1
:
****
OR
Input2
:
****
Input3
:
****
Auto Link :
Off
Input-Front :
****
HDMI1
:
****
HDMI2
:
****
HDMI-Front :
****
Move
Return
SEL
Video
Audio
TV Guide On Screen
Channel Manager
Locks
Timers
Setup
Power Swivel
Move
Select
SEL
Setup
Setup The Menu Options
Set The Screen Saver
OR
Set The Inputs
Set The AV Net
Set The Closed Captions
Set The IR Out
CableCARD Information
Select The Quick Start Option
Reset The Software
Move
Select
SEL
69
Publicidad
