Publicidad
Idiomas disponibles
Idiomas disponibles
Setup
7.
Use the CURSOR PAD
device you wish to learn. (Example: DVD 3)
8.
Select NEXT to continue.
AV Net Setup Wizard : Custom Settings
Custom settings
Please choose the device you wish to learn.
Custom Device
DVD3
Move
SEL
Select
9.
Select the DVD 3 softkey to learn.
(Example: PLAY
button).
10. Select Done to continue.
AV Net Setup Wizard : Custom Settings
Select the DVD3 softkey to learn?
TV Softkeys
POWER
MENU
SELECT
EXIT
Select
Move
SEL
11. Press and hold the
remote control while pointing directly at the
learning AV NET sensor of the Plasma TV
(located at the lower right corner of the screen)
at a distance of 3.2 feet or 1 meter maximum.
AV Net Setup Wizard : Custom Settings
Press and hold desired button to transfer the
command to AV NET.
Please wait while AV NET
Learns the command....
Move
SEL
Select
12.
If the IR Code transfer was successful, the
screen below appears, then select "OK" to
continue setup.
AV Net Setup Wizard : Custom Settings
Transfer was successful.
Press OK to store and continue.
Move
SEL
Select
or
to choose the
B ack
Next
B ack
Done
"Play button" of the DVD
Cancel
OK
13. Select another softkey to learn or select
"DONE" to move on to the next screen.
AV Net Setup Wizard : Custom Settings
Select the DVD3 softkey to learn?
TV Softkeys
POWER
MENU
SELECT
EXIT
Move
SEL
Select
14. Select the Test button
check the response of the device to this
command.
Test Buttons will show you first learned keys
with a maximum of 3.
15. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD3 Settings
B rand Name
Custom
IR Code Set
Custom
Transmission Test
Test B utton
Move
IR Out
SEL
16. Use the CURSOR PAD
Input that connects to the video and audio
output of the DVD.
17. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD3 Settings
B rand Name
Custom
IR Code Set
Custom
Inputs settings
Video Input
Not Connected
Audio Input
Not Connected
Move
Change Source
18.
Confirm all settings, then press the SELECT
button to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD3 Settings
B rand Name
Custom
IR Code Set
Custom
Video Input
Not Connected
Audio Input
Not Connected
All settings are complete!
Move
SEL
Select
B ack
Done
"Play button" to
,
,
and
to
POWER
B ack
Next
or
to select the TV
,
,
and
to
B ack
Next
SEL
Select
B ack
Next
75
Publicidad
