Sony VPL-FHZ131L Manual De Referencia Rápida página 42

Step 1
Checking the Supplied Accessories
RM-PJ30 Remote Commander (1)
Size AA (R6) batteries (2)
AC power cord (1)
Plug holder (1)
Terminal cover (1)
Quick Reference Manual (this manual) (1)
Operating Instructions (CD-ROM) (1)
Using the CD-ROM manuals
The manuals can be viewed on a computer with
Adobe Reader installed.
You can download Adobe Reader for free from the
Adobe website.
1
Open the "index.html" file on the CD-ROM.
2
Select the language of the manual you want
to view.
Note
If you damage or lose the CD-ROM, you can purchase a
new one from your dealer or Sony service representative.
Installing batteries
CAUTION
The following size and number of batteries are
required for the Remote Commander.
 Size AA (R6) battery
 2 pieces
To avoid risk of explosion, use only the following
type of battery.
 Manganese or alkaline battery
1
Remove the lid, then install the two AA (R6)
batteries (supplied) with the correct polarity.
While pressing the
lid, slide it.
2
Replace the lid.
42
GB
Preparing
Preparing
Be sure to install
the battery from
the  side.
Connecting the AC Power Cord
1
Plug the AC power cord into the AC IN socket,
then attach the plug holder to the AC power
cord.
Plug holder (supplied)
2
Slide the plug holder over the AC power cord
to fix to the unit.
Attaching the Projection Lens
Notes

Avoid removing/attaching the lens with the projector
installed suspended from a ceiling.
 For usable projection lenses, see "Optional accessories"
on the Operating Instructions.
 Do not attach any lens other than the specified accessory
lens sold separately.
 Be careful not to drop the projection lens.

Avoid touching the lens surface.
1
Turn off the projector, then unplug the AC
power cord from the wall outlet.
Caution
When replacing the lens, your eyes may be
damaged if a strong light accidentally gets into
your eyes. Before replacing the lens, turn off the
projector and then unplug the AC power cord.
AC IN socket
AC power cord
(supplied)