Descargar Imprimir esta página

Specifications; Installing The Device - Ducasa M-28 SPLIT Manual Del Usuario

Turboconvector

Publicidad

Idiomas disponibles

Idiomas disponibles

3. SPECIFICATIONS

Model names
M-28 Ref.0.265.612

4. INSTALLING THE DEVICE

The heater shall be installed and used according to the safe standard.
To avoid all dangers, follow the safety instructions.
- The installation must be done by the service agent or similarly qualified persons in order to
avoid a hazard.
- Important! Make sure that there are no electric cables or other installations (for example
water pipes) near the drill holes. Make sure that the appliance is securely and vertically fitted
to the wall.
Get two holes on the wall 2 m above the floor and near the corner more 25 mm, be sure to
make the diameter just as same as the expanding pipe. Fix two screws on the expanding
pipe, keep the tips of the screws out for 10mm, and hang up the machine after the screws
are fixed enough.
330
Voltage
AC220-240V 50/60Hz 2000W
14
Power

Publicidad

loading