Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE CONTROL VIEW:
1.Remote control, please use Lithium battery CR2025 3V.
2.The remote control power button is labeled as such
PS:After the machine is started up, when the heating function is not turned on, it will be shut
down directly. The product will not go into the process of shutdown waiting for 30 seconds,
but will go into the standby state directly
6. OVERHEAT PROTECTION
This heater is protected with an overheat protection that switches off the appliance
automatically in case of overheating. For example: due to the total or partial obstruction of
the vents. In this case, unplug the appliance, wait about 30 seconds for it to cool and remove
the object which is obstructing the vents. Then switch it back on as described above. The
appliance should now operate normally. If the problem persist, please contact Customer
Service for assistance.
7. CLEANING & MAINTENANCE
Before undertaking any cleaning or maintenance on the appliance, disconnect it from
the power supply.
For cleaning it is recommended to use a soft moist rag and neutral detergent. Do not
use an abrasive cloth or devices which could affect the appearance of the appliance.
Check that the hot air outlet and the ventilation inlet are free of dust and dirt.
During cleaning, be careful not to touch the heating elements.
To open the filter on the back for cleaning, press the top of plastic net at back.
1."ON/OFF" Main power button
Setting timer from 1-24 hours
2."24H"
COLD,WARM,HOT 3 setting for selection
3."MODE"
4."Swing"
Louver swing up and down
Child-Lock function for heater
5."LOCK"
Window Open Function
6."AUTO"
7."Delay"
Set the open and closed time of heater
8."W.Timer" Set the timer of one week
Increase
9."+"
Decrease
10."-"
Set real time
11."Set"
18
Publicidad
Capítulos
