Descargar Imprimir esta página

Operation Instruction; Timer Function - Ducasa M-28 SPLIT Manual Del Usuario

Turboconvector

Publicidad

Idiomas disponibles

Idiomas disponibles

5. OPERATION INSTRUCTION

1. Before inserting the plug into an electrical outlet, make sure that the electrical supply in
your area matches that on the rating label on the unit.
2. Carefully remove the heater from the plastic bag and the carton.
3. Place the heater on a firm level surface ,setting the master button to "-"position.plug the
cord set into a AC220-240V electrical outlet,with "BEE" sounds the "Power"light is on
and the heater will shows the default temperature ,it will twinkle 3 seconds.
1) HEATING PERPARE
Set time
Before turn on the heater,set the time as right time.Press remote control "
on control panel,LED display shows 00:00 and "Mo"light on.
Press "Set" button one time,LED display front "00" twinkle, press"
HOUR
buttons set the Hours from 01--00(01=1 o'clock,02=2 o'clock...00=24 o'clock ect.)
MINUTE Press "Set" button again,LED display behind "00" twinkle, press "
buttons set the minutes from 00--59(01=1 Minute,02=2 Minute ect.)
WEEK Press "Set" button again,"Mo"light twinkle ,press "
from Mo--Su (Mo=Monday...Su=Sunday ect.)
PS:Press "Set" button,screen shows number will twinkle 5 seconds,you should operate in
time ,otherwise appliance will get back to standby.
(Appliance will keep the right time until power off)
2)General Using OPERATION
1.
Turn the heater ON by pressing remote control the ON/OFF button ,the unit will blow the
cold air .
Pressing the "MODE" button on remote control ,the unit will blow the warm air and
2.
will light on.
3. Pressing the "MODE" button second times on remote control,the unit will blow the hot air
and the
will light on
4.Pressing the "MODE" button Three times on remote control,the unit will blow the cold air
PS:For smart operate,customer only press the one start button near about master
button,the heater will working with hot air and
Will light on
3) 24H Timer FUNCTION
1.Open the appliance as working conditions,(fan,warm,hot are all ok).This function
through by Remote control "
2. Press "
" button ,set the timer up to 24 hours,keep press "
" button .
15
" button,light
two buttons set the week
" button to increase
two
two

Publicidad

loading