Descargar Imprimir esta página

Senco FinishPro 2n1 Instrucciones De Operación página 16

Ocultar thumbs Ver también para FinishPro 2n1:

Publicidad

Idiomas disponibles

Idiomas disponibles

Read All Safety Warnings Before Using Air Compressor
Hazard
Risk of
Electric Shock
or
Electrocution
Safety Warnings
Potential Consequence
 Serious injury or death could
occur if the air compressor is
not properly grounded. Your air
compressor is powered by
electricity and may cause
electric shock or electrocution if
not used properly.
 Electrical shock may occur from
electrical cord.
 Electrical shock may occur if air
compressor is not operated
properly.
 Serious injury or death may
occur if electrical repairs are
attempted by unqualified
persons.
4
Prevention
 Make sure the air compressor
is plugged into a properly
grounded outlet which provides
correct voltage and adequate
fuse protection.
 Check power cord for signs of
crushing, cutting or heat
damage. Replace faulty cord
before use.
 Keep all connections dry and
off the ground. Do not allow
electrical cords to lay in water
or in such a position where
water could come in contact
with them. Do not touch plug
with wet hands.
 Do not pull on the electrical
cord to disconnect from the
outlet.
 Never operate air compressor
in wet conditions or outdoors
when it is raining.
 Never operate air compressor
with safety guards/covers
removed or damaged.
 Any electrical wiring or repairs
performed on this air
compressor should be done by
Authorized Service Personnel
in accordance with National
and Local electrical codes.
 Before opening any electrical
enclosure, always shut off the
air compressor, relieve
pressure and unplug the air
compressor from the power
source. Allow air compressor to
cool down. Never assume the
air compressor is safe to work
on just because it is not
operating. It could restart at any
time!

Publicidad

loading

Este manual también es adecuado para:

Finishpro 10Finishpro 15Finishpro 18Ls1xp