Eminent EM8610 R0 Manual Del Usuario página 35

6.19 Register wireless sensors and RFID tags
6.19.1 Register new wireless sensor
Enter the password and press
The LED will turn on. Now add the sensors by triggering the sensors piece by
piece. If you hear a beep the sensor is registered to the system. If you hear 2
beeps this indicates this sensor is already registered. The first sensor you register
will be Zone 1 the second sensor Zone 2 etc.
6.19.2 Register new RFID-tags
Enter the password and press
The LED will turn on. Now add the RFID-tags piece by piece by holding the RFID
tag close to the receiver (circle left of num. pad). If you hear a beep the RFID-tag
is registered to the system. If you hear 2 beeps this indicates this RFID-tag is
already registered.
6.20 Register wireless siren
The wireless siren is an extra accessory. To register the siren to the system press
shortly the connect button of the siren. The LED will turn on. Press the
control panel. You will hear a beep to notify you the registration is successful
7.0 Remote control
7.1 Front of remote control
Arm
In-home
security
button on the control panel.
button on the control panel.
35 |
MULTILINGUAL
of the
LED Indicator
Disarm
Panic button