Other Functions; Adjusting The Sound Characteristics; Attenuating The Sound - Sony XR-2800 Manual De Instrucciones

If you cannot tune in to a preset
station
Press either side of (SEEK/AMS)
momentarily to search for the station
(automatic tuning).
Scanning stops when a station is received.
Press either side of (SEEK/AMS) repeatedly
until the desired station is received.
Note
If the automatic tuning stops too frequently, press
(LCL) to light up "LCL" on the display (local seek mode).
Only the stations with relatively strong signals are tuned
in.
Tip
If you know the frequency, press and hold either side of
(SEEK/AMS) until the desired station is received (manual
tuning).
EN
6

Other Functions

Adjusting the sound
characteristics
1
Select the item you want to adjust by
pressing (SEL) repeatedly.
VOL (volume) n BAS (bass) n TRE
(treble) n BAL (left-right) n FAD (front-
rear)
2
Adjust the selected item by pressing
either (+) or (–).
Adjust within three seconds after selecting.
(After three seconds the button will again
serve as the volume control button.)

Attenuating the sound

Press (ATT).
The "ATT" indication flashes.
To restore the previous volume level, press
again.