YaberAuto YA40 Manual Del Usuario página 10

support@yaberauto.com
You can read the LCD indicator when the smart clamp goes into
protection mode in the following situtations.(25℃ )
Situations
Low-voltage Protection
High-voltage Protection
Reverse Charging Protection
Reverse Voltage Protection
Short Circuit Protection
Over Temperature Protection
Start Operation Timed Out
Over Voltage Protection （ clamp ）
Standby Mode
Voltage Detection
Sticking Relay Contacts
LCD Display
1 . " " i c o n l i g h t s u p ; 2 . B u z z e r s o u n d s
intermittently once a second; 3.Current voltage
value is displayed on the LCD.
1 . " " i c o n f l a s h e s ; 2 . B u z z e r s o u n d s
continuously.
1." " icon lights up; 2."
3.Buzzer sounds intermittently once a second.
1." " icon lights up; 2."
3.Buzzer sounds intermittently once a second.
1." " icon lights up; 2."
3.Buzzer sounds intermittently once a second.
1." " icon lights up; 2."
3.Buzzer sounds intermittently once a second.
" " icon flashes when you take no operation
for more than 60 seconds after properly
connected to the smart clamp.
1." " icon lights up; 2."
sounds intermittently once a second.(correctly
charged)
1.Current voltage value is displayed on the
LCD. 2.All the icons flashes.
" " icon lights up and current voltage value
is displayed on the LCD. (Car battery voltage
needs to be ≧ 8V)
" " i c o n f l a s h e s a n d b u z z e r s o u n d s
continuously.
6
EN
" icon flashes;
" icon flashes;
" icon flashes;
" icon flashes;
" flashes; 3.Buzzer